Mechanical can solve with 8 cores but not with 12. two processors 8 cores each. MPI test runs fine, BIOS was updated, hyperthreading turned off. Also SMP solves work but DMP does not. Solve.out ends with: * NOTE * CP = 7.781 TIME= 11:06:33 The PCG solver has automatically set the level of difficulty for this model to 1.

您所在的位置：网站首页 › keyshotout of memory › Mechanical can solve with 8 cores but not with 12. two processors 8 cores each. MPI test runs fine, BIOS was updated, hyperthreading turned off. Also SMP solves work but DMP does not. Solve.out ends with: *** NOTE *** CP = 7.781 TIME= 11:06:33 The PCG solver has automatically set the level of difficulty for this model to 1.

Mechanical can solve with 8 cores but not with 12. two processors 8 cores each. MPI test runs fine, BIOS was updated, hyperthreading turned off. Also SMP solves work but DMP does not. Solve.out ends with: * NOTE * CP = 7.781 TIME= 11:06:33 The PCG solver has automatically set the level of difficulty for this model to 1.

#Mechanical can solve with 8 cores but not with 12. two processors 8 cores each. MPI test runs fine, BIOS was updated, hyperthreading turned off. Also SMP solves work but DMP does not. Solve.out ends with: *** NOTE *** CP = 7.781 TIME= 11:06:33 The PCG solver has automatically set the level of difficulty for this model to 1.| 来源: 网络整理| 查看: 265

CB Defense software was installed and seemed to be blocking any Distributed runs. Also, seemed to be interfering with GPU usage. Turned off CB Defense and distributed solves worked. IT Added an exception for the C:Program FilesANSYS Inc directory and all worked well.

【本文地址】

今日新闻

推荐新闻